DMX – startadress:<\/p>\n\n\n\n
From the DMX signal the data of 8 channels, starting at the start address, are used.<\/p>\n\n\n\n
To change the DMX start address, the DMX page is called up via the “right \/ left” buttons.<\/p>\n\n\n\n
By holding the shift-key the address can be changed with the “up \/ down” keys. Holding the “up \/ down” key for a longer time causes the addresses to scroll faster.<\/p>\n\n\n\n
After setting the start address, the DMX page must be exited. Only then will the new address be adopted and stored permanently.<\/p>\n\n\n\n
The maximum settable start address is 505, so then the light 4 is at the addresses 511 and 512.<\/p>\n\n\n\n
If an address above 506 is required for a luminaire, the start address must be set to 505 and the luminaire must be “taught in” to units 2, 3 or 4.<\/p>\n\n\n\n
The display “DMX OK” or “no DMX” is self-explanatory.<\/p>\n","protected":false},"excerpt":{"rendered":"
DMX – startadress: From the DMX signal the data of 8 channels, starting at the start address, are used. To change the DMX start address, the DMX page is called up via the “right \/ left” buttons. By holding the shift-key the address can be changed with the “up \/ down” keys. Holding the “up … Continue reading DMX<\/span>